|
Transformer
and chokeset for Centurion / Stanley / Oliver
300B single ended amplifiers, included 2 pcs. JJ300B tubes.
|
These
amplifiers are popular amongst self builders. But it is difficult
to keep the building of a nice 300B single ended amplifier payable.
“Kept” is a better word now. Because those days are
over.
The other
parts you’ll need you can easily find yourself. You can
buy silver wire or a copper plate for a chassis at our place.
Look on the “Toebehoren” page for that.
These transformers
will be supplied with nice housings
|
Transformer
and choke set for the “Big C” single ended monoblok
|
The
“Big C” is an amplifier which leaves nothing to wish.
Monoblocks, extra heavily built power transformer, which does
his work easily, 6 pcs 6-chamber chokes and output transformers
with the sublime amorphous cores.
The transformers will be supplied with nice housings.
|
| Transformer
and choke set for 2 Goliath 211 monoblock
single ended amplifiers.
|
This transformerset
is compleet. 2 very large dimension power transformers. Low capacitance
with a low induction.
Further on 6 chokes with amorphous core.
And last but not least: two big output transformers.
The transformers
will be supplied with nice housings.
|
| Transformer
and choke set for the KT88 push pull amplifier. It excist of a
power transformer, 2 chokes and 2 double chamber winded EI-core
output transformers. And ofcourse 4 tubes JJ KT88
|
Need
some more power? Then a KT88 PP amplifier would be a good option.
Do you want to make a nice tube amplifier which is payable? Then
this amplifier could also be your choice.
The output
transformers are winded in a special way. They are complete symmetrical
built so that both tubes see an identical load. The transformers
have a large frequency range. Also without the use of reverse
feedback.
|
| Transformer
and choke set for the “Annastasia”
and “Topcap 807” push
pull amplifiers.
It excist of a power transformer, two chokes and two double chambres
winded EI-core output transformers
|
EA
very popular amplifier we’ve noticed, is the “Annastasia”
PP amplifiers with the 7027 as power tube.
Pay
attention to the price, this amplifier is realizble for every
budget!
The 7027a is comparable with a KT88 with the power of a EL34.
Electricly the 807 also looks a lot like this tube.
The
same transformer set is also used for the Topcap 807 PP amplifier.
We don’t have the tube 807 in our programm, but it won’t
be a problem to find it yourself.
|
| Transformer
and choke set for the “807SE”amplifier.
It excist of a power transformer, two chokes and two EI-core output
transformers.
The set will not be supplied with
807 tubes
|
Who
told you that a nice single ended amplifier always costs a lot
of money? We didn’t!
The 807SE was publiced a few years ago. Also a fine design if
this is your first amplifier you’re building. Don’t
mistake the musical qualities. These are above expectation.
|
| TTransformer
and choke set for Scratch phono amplifier
and/or 6072 line amplifier
|
More
and more music lovers discover the beautiful qualities of the
old vinyl again. And justifyable!
The transformers are originably designed for the
Scratch phono amplifier. But also the 6072 line amplifier has
got the same transformers in the power supply. The set excist
of a power transformer and the three required chokes. The power
transformer is calculated so that there is also a combination
from the phono to feed the line stage.
|
TTransformer
and choke set for the PhonoDude
phono amplifier, included 2 pcs.
5755 double triode.
|
This
power transformer of the new phono step is identical to those
of the Scratch set. The output transformer is built with one choke.
The
tubes 5755, which you can’t find everywhere, are included
in the set.
Components like power capacitors of JJ, wiring, high resolution
Auricap capacitors, sockets and JJ ECC83S tubes for the last amplifier
step are also part of our program. There still are some 6X4
rectifier tubes on stock..
Phonodude
project
|
| TTransformer
and choke set for the “Little Ceaser”300B
single ended monoblock amplifiers, included 2 pcs. JJ300B tubes
|
These
amplifiers are new and from the first moment incredibly popular.
Here is your chance for a pair top monoblock output amplifiers
that are payable.
In this design there is made use of good available components,
what makes it even more attractive. Of course the output transformers
are made with c-core 0,05mm lamination, a transformer which has
no competition in his classe.
We are proud of these nice components.
And as you see, the power tubes are again included
in the set
|
Interstage
trafo 1:1